FLASH POINT CHECK

FLASH POINT CHECK

Closed Cup Flash Point Test / Pensky-Martens Order Code: T 750 The identification of possibly hazardous liquids is a safety issue in manifold applications. The Flash Point Check allows this both right on-site and right on-time where and when flash point verification of mineral oils is required. The FLASH POINT CHECK consists of a Closed

INSOLUBLES CHECK

INSOLUBLES CHECK

Visual Particle Determination Order Code: T 319 It is the purpose of the INSOLUBLES CHECK to provide detailed information about particles regarding their nature, size and relative quantity. The test procedure is based on a vacuum filtration system used to filter insoluble particles out of the oil sample. These particles will form a deposit on

SAMPLING KIT

SAMPLING-KIT

Quick Sample taking Order Code: SAM 007 The Sampling Kit enables to take a sample of fuel, lube and hydraulic oil with a tube which is fixed at a telescope rod. By using the vacuum pump which is coupled with an adapter at a sample bottle, it is possible to suck the oil sample out

SALT CHECK

SALT CHECK

Salt Water Determination Test Kit Order Code: V 150 It is important to know the nature of water (fresh or salt) found in lubricating or fuel oil as it might give some help in identifying the source of the leakage. The SALT / FRESH WATER CHECK is an easy and quick method to check the

AN CHECK

AN CHECK

Easy to use AN titration test Order Code: T 550 High operation temperatures severely stress the oil. This results in oxidation and nitration, viscosity increase, forming of acid sludge and sludge deposits. Acid number or AN is a measure of both organic and inorganic acid contamination within the oil. The handy and easy to use

JUNG CHECK

JUNG CHECK

Order Code: T 710 As other option we continue to offer the original analogue falling ball viscosity meter with a measuring range between 10 to 999 mm²/s. FEATURES • Measuring range: 10 – 999 mm2/s • Measuring time: about 5 min. • Accuracy: +/- 3 %

VISCO CYLINDER

VISCO CYLINDER

STANDARD AND LOW VIS Electronic Falling Ball Viscosity Measuring Device Order Code: T 720 / T 730 While one option keeps the measuring range of the analogue device, the other option is designed especially for a very low viscosity measurement, starting in a range from 1 mm²/s. Measuring the viscosity becomes easy, as the dimensions

VISCO DENS PLUS

VISCO DENS PLUS

Heated Electronic Falling Ball Viscosity Measuring Device Order Code: T 322 Applying this test device, viscosity and density get measured in the same test tube and of the same sample. Measuring is possible at three different temperatures. The test equipment includes 4 hydrometers to measure density. By employing the corresponding hydrometer, the density of fuel

VISCOSITY COMPARATOR

VISCOSITY COMPARATOR

Go / No Go Viscosity Determination Order Code: V 200 Viscosity of lubricating and hydraulic oils should be checked frequently in order to avoid engine malfunction. A deviation of 10% from standard viscosity means a considerable risk. The VISCOSITY COMPARATOR is an easy-to-perform test, providing a go / no go answer whether the viscosity is

IRON CHECK

IRON-CHECK

IRON CHECK, patent pending Order Code: T 140 Referring to the significance of iron in lube oil, especially with regard to cylinder drain oil, Martechnic® has developed an easy to handle iron test. The method is based on a chemical reaction of two reagents with the iron present in its special state – corrosive and